Hydraulic separator in compact design

10 m³/h up to 300 m³/h

Type II, PN 6

 

Chamber size: 160/80 up to 700/500
Heating water throughput rate: 10 m³/h up to 300 m³/h
Operating pressure / Operating temperature: max. 6 bar / max. 110°C
Product description

Vertical rectangular chamber made of hollow square profile S235.
Nozzles for heat consumers and heat generators made of welded steel tube
with welding neck flanges PN6. Operating pressure max. 6 bar, operating temperature max. 110°C.
The hydraulic separator is pressure-tested and primed at the factory.
Pedestal with boreholes for attachment to the floor.

  • 2" threaded connector for desludging;
  • 1/2" coupling sleeve for temperature sensor;

Type II: Direct connection of two heat generators to the hydraulic separator possible.

Accessories

Thermal insulation

Insulation in compliance with EnEV 2014 consisting of 2 half shells with cutouts for all nozzles

  • 65 mm PUR foam in coarse grain aluminium casing
  • 100 mm mineral wool in galvanized sheet steel casing

 

Technical data
Heating water throughput rate
Chamber size

Nozzle

2 x / 4 x

Water quantity

Total height

Wall thickness

[m³/h] [Width / Height] [DN] [litres/rm] [mm] [mm]
10 160/80 65 / 50
15.5 1,640 4.0
18 200/120 80 / 50
30.8 1,650 4.0
27 250/150 100 / 65
55.3 1,670 4.0
43 300/200 125 / 100
79.1 1,680 6.0
57 400/200 150 / 100
107.6 1,695 6.0
85 450/250 200 / 125 152.0 1,720 8.0
110 500/300 200 / 150 246.1 2,020 8.0
170 600/400 250 / 200 395.2 2,045 12.0
235 650/450 300 / 250 496.6 2,145 12.0
300 700/500 300 / 250 719.0 2,490 12.0
Downloads

Technical information

Your direct line

Any questions or comments?

We will be pleased to offer advice and answer any questions concerning our product range.

Just write us a message or contact us by phone:
+49 2557 / 93 93-0.

We are available from Monday to Thursday from 07.30 a.m. to 04.30 p.m. and Friday from 07.30 a.m. to 15.00.