Hydraulic separator in round design

12 m³/h up to 125 m³/h

Type II, PN 6

 

Chamber size: DN 150 up to DN 400
Heating water throughput rate: 12 m³/h up to 125 m³/h
Product description

Vertical round chamber made of welded tube P235.
Nozzles for heat consumers and heat generators made of welded steel tube
with welding neck flanges PN6. The hydraulic separator is pressure-tested and primed at the factory.
Operating pressure max. 6 bar, operating temperature max. 110°C.
Pedestal with boreholes for attachment to the floor.

  • 2" threaded connector for desludging
  • 1/2" coupling sleeve for temperature sensor and ventilation

Type II: Direct connection of each boiler to the hydraulic separator from right to left possible.

Accessories

Thermal insulation

Insulation in compliance with EnEV 2014 consisting of 2 half shells with cutouts for all nozzles.

  • 60 mm PUR foam in galvanized sheet steel casing
  • 100 mm mineral wool in galvanized sheet steel casing
Technical data
Heating water throughput rate
Dimension

Nozzle

2 x / 4 x

Water quantity

Total height

Wall thickness

[m³/h] [DN] [DN] [litres/rm.] [mm] [mm]
12 150 65 / 50
30.3 1,900 4.5
18 200 80 / 50
50.6 1,900 6.3
28 200 100 / 65
50.6 1,900 6.3
40 250 125 / 80
80.1 1,900 6.3
65 300 150 / 100
120.2 2,000 7.1
85 350 200 / 125 148.5 2,250 8.0
125 400 200 / 150 198.8 2,500 8.8
Downloads

Technical information

Your direct line

Any questions or comments?

We will be pleased to offer advice and answer any questions concerning our product range.

Just write us a message or contact us by phone:
+49 2557 / 93 93-0.

We are available from Monday to Thursday from 07.30 a.m. to 04.30 p.m. and Friday from 07.30 a.m. to 15.00.