Hydraulic separator in round design

12 m³/h up to 600 m³/h

Type I, PN 6

 

Chamber size: DN 150 up to DN 800
Heating water throughput rate: 12 m³/h up to 600 m³/h
Product description

Vertical round chamber made of welded tube P235.
Nozzles for heat consumers and heat generators made of welded steel tube
with welding neck flanges PN6. The hydraulic separator is pressure-tested and primed at the factory.
Operating pressure max. 6 bar, operating temperature max. 110°C.
Pedestal with boreholes for attachment to the floor.

  • 2" threaded connector for desludging
  • 1/2" coupling sleeve for temperature sensor and ventilation

Type I: Boiler connection have to be brought together in front of the hydraulic separator by the customer.

Accessories

Thermal insulation

Insulation in compliance with EnEV 2014 consisting of 2 half shells with cutouts for all nozzles.

  • 60 mm PUR foam in galvanized sheet steel casing
  • 100 mm mineral wool in galvanized sheet steel casing
Technical data
Heating water throughput rate
DimensionNozzle

Water quantity

Total height

Wall thickness

[m³/h] [DN] [DN] [litres/rm.] [mm] [mm]
12 150 65
30.3 1,700 4.5
18 200 80 50.6 1,700 6.3
28 200 100 50.6 1,700 6.3
40 250 125 80.1 1,700 6.3
65 300 150 120.2 1,800 7.1
85 350 200 148.5 1,850 8.0
125 400 200 198.8 1,900 8.8
215 500 250 336.8 2,000 11.0
215 500 300 336.8 2,050 11.0
350 600 350 591.6 2,450 12.5
350 600 400 591.6 2,550 12.5
450 700 400 890.0 2,750 13.0
600 800 500 1,300.0 2,975 13.0
Downloads

Technical information

Your direct line

Any questions or comments?

We will be pleased to offer advice and answer any questions concerning our product range.

Just write us a message or contact us by phone:
+49 2557 / 93 93-0.

We are available from Monday to Thursday from 07.30 a.m. to 04.30 p.m. and Friday from 07.30 a.m. to 15.00.