Small hydraulic separators

Hydraulic separator, consisting of a vertical rectangular chamber
made of hollow square profile S235 with welded-in top and bottom,
with four lateral nozzles for the connection of heat consumers and heat generators.
The hydraulic separator is pressure-tested and zinc-plated at the factory.
Operating pressure max. 4 bar, operating temperature max. 110°C.

  • Incl. thermal insulation in compliance with EnEV dated 01/05/2014 consisting of two half shells with end pieces and cutout for all nozzles.

Magnetite separation module for small hydraulic separators

Magnetic insert for separation of ferromagnetic substances in small hydraulic separators.
Consisting of: Magnetic rod screwed into the thermwell, desludging nozzle with ball valve 1/2". Enables desludging with pressurized system.

go to product


Hydraulic separator manifold for accommodation of a standard
pump assembly with a centre distance of 125 mm.
Chamber size: Width 210 mm, depth 80 mm, height 80 mm.
The MonoFixx is pressure-tested and primed at the factory.

  • Connections, boiler side 1 1/2" flat-sealing,
    system side flat-sealing with 1 1/2" cap nut
  • incl. thermal insulation in compliance with EnEV dated 01/05/2014

up to 3.0 m³/h
up to 6.5 m³/h

Maintenance box - Magnetite separation module

The maintenance box, suitable for the MonoFixx 80/80, as an optional extra for magnetite separation. Consisting of section tube 80x60, material S235. Equipped with desludging nozzle and ball valve 1/2", and magnetic rod screwed into the thermwell. For attachment to the boiler return line beneath the manifold. Enables desludging with pressurized system.

up to 3,0 m³/h
up to 6,5 m³/h

Your direct line

Any questions or comments?

We will be pleased to offer advice and answer any questions concerning our product range.

Just write us a message or contact us by phone:
+49 2557 / 93 93-0.

We are available from Monday to Thursday from 07.30 a.m. to 04.30 p.m. and Friday from 07.30 a.m. to 15.00.