Small hydraulic separators up to 8.0 m³/h
incl. EPP insulation
|Heating water throughput rate:||8.0 m³/h|
|Operating pressure / Operating temperature:||max. 4 bar / max. 110°C|
Hydraulic separator, consisting of a vertical rectangular chamber
made of hollow square profile S235 with welded-in top and bottom,
with four lateral nozzles for the connection of heat consumers and heat generators. The hydraulic separator is pressure-tested and primed at the factory. Operating pressure max. 4 bar, operating temperature max. 110°C.
- 1/2" coupling sleeves for ventilation, emptying and sensors.
- Outlet connector: 2" external thread
- incl. thermal insulation in compliance with EnEV 2014 consisting of two half shells with end pieces and cutouts for all nozzles. 50 mm EPP foam (black).
Thermal insulation, included in the set
For chamber size
|EPP foam (black)|
|[mm]||[Insulation thickness in mm]|
Insulation in compliance with EnEV 2014 consisting of two half shells with end pieces and cutouts for all nozzles.
Wall mounting set (= 2 pcs.)
Magnetite separation module - Thread
Magnetic insert for separation of ferromagnetic substances in small low loss headers.
Consisting of: Magnetic rod screwed into the thermwell, desludging nozzle with ball valve ½“.
Enables desludging with pressurized system.
Set components: Ball valve, magnetite filter cartridge
Made of galvanized sheet steel with transparent cover for three-line label for screw fixing to the thermal insulation. Size: 100 x 50 mm, colours: red for flow line / blue for return line
|Heating water throughput rate||Cross-section||Nozzle||
|[m³/sec.]||[Width / Depth]||[inch]||[litres/rm]||[mm]||[mm]|
||120/80||2" external thread