Product description
Combined flow and return manifold with chambers arranged adjacent to each other, separated by sinusoidal partition wall, with horizontally welded-on hydraulic separator located directly below.
Consisting of square profiles S235, wall thickness 4 mm. The HydroFixx is pressure-tested and primed at the factory. Operating pressure max. 6 bar, operating temperature max. 110°C.
- The supply from/to the heating boiler is possible both from the top onto the compact manifold and from the bottom to the hydraulic separator.
- Heating circuit connections as threaded and / or flanged connectors PN 6 / PN 16 and aligned to the height of the shut-off valves.
- With downward-running 1 1/4" desludging sleeve.
Configurator
Accessories
Stand bracket

For chamber size
| Bottom plate | Head plate | Adjustable in height |
---|---|---|---|
[mm] | [mm] | [mm] | [mm] |
120/120 to 200/200 |
150 x 150 | 120 x 120 | from 270 to 340 |
280/320 to 500/550 | 200 x 200 |
150 x 180 |
from 270 to 340 |
Soundproof and zinc-plated, consisting of bottom plate with stand pipe and head plate
with guide pipe incl. connecting screws, adjustable in height.
Wall bracket

For chamber size
| Head plate |
Outreach |
---|---|---|
[mm] | [mm] | [mm] |
120/120 to 200/200 |
120 x 120 | 300 |
280/320 to 500/550 | 150 x 180 |
500 |
Soundproof and zinc-plated, consisting of wall panel for screw fastening,
bracket and head plate.
Thermal insulation

For chamber size
| PUR foam in coarse grain aluminium casing | PUR foam in galvanized sheet steel casing | Mineral wool in galvanized sheet steel casing |
---|---|---|---|
[mm] | [Insulation thickness in mm] | [Insulation thickness in mm] | [Insulation thickness in mm] |
120/120 to 200/200 |
60 | - | 100 |
280/320 to 500/550 | - | 60 | 100 |
In compliance with EnEV 2014 consisting of half shells with end pieces and cutouts for all nozzles.
Maintenance box - Magnetite separation module
Enables desludging with pressurized system. Consisting of section tube 120x80, material S235, connection: 1x top Rp 2“, 1x bottom R 2“. Equipped with desludging nozzle and ball valve ½“ and magnetic rod screwed into the thermwell. For attachment to boiler return line beneath the manifold.
Set components: EPP insulation, ball valve, magnetite filter cartridge, 2" screw fitting
Draining gutter

Made of galvanized sheet steel, size: 100/125/100 mm with 2" drain sieve.
Fastening devices: Stand bracket, galvanized (height adaptable by customer), wall bracket, galvanized
(max. outreach 200 mm)
Identification plate

Made of galvanized sheet steel with transparent cover for three-line label for screw fixing to the thermal insulation. Size: 100 x 50 mm, colours: red for flow line / blue for return line
Technical data
Heating water throughput rate
|
Output at
ΔT 20 K |
Manifold chamber
| Water quantity Manifold | Water quantity Low loss header |
Heat transfer at 70°/50°C |
Return flow boost |
Wall thickness | |
---|---|---|---|---|---|---|---|---|
[m³/h] | [kW] | [Width / Height] | [l/rm] | [l/rm] | [kW] | [%] | [K] | [mm] |
7.0 | 160 | 120/120 | 8.0 | 4.0 | 2.7 | 1.8 | 0.3 | 4 |