Small manifold up to 70 kW
incl. EPP insulation and wall bracket
|Nozzle:||as flat-sealing rim and 1 1/2" cap nut|
|Heating water throughput rate:||3.0 m³/h|
|Output at ∆t 20K:||70 kW|
|Uniform nozzle clearance:||125 mm|
|Operating pressure / Operating temperature:||max. 4 bar / max. 110°C|
Combined flow and return manifold, consisting of rectangular tube 80 x 60 mm with flow and return line chambers arranged adjacent to each other, separated by sinusoidal partition wall and made of black sheet steel S235. The Sinusverteiler manifold is pressure-tested and primed at the factory. Operating pressure max. 4 bar, operating temperature max. 110°C.
- Connection, heating circuits: 1 1/2“ cap nuts
- Connection, boiler circuits: Flat-seal nozzle, external thread 1 1/2"
Thermal insulation, included in the set
|For chamber size||EPP foam (black)|
|[mm]||[Insulation thickness in mm]|
In compliance with EnEV 2014 consisting of half shells with end pieces and cutouts for all nozzles.
Wall bracket, included in the set
Soundproof and zinc-plated, consisting of wall panel for screw fastening and bracket, outreach up to manifold centre: 160 mm
(2 wall brackets are included in each set)
Maintenance box - Magnetite separation module
Enables desludging with pressurized system. Consisting of section tube 80x60, material S235, connection: 2x G 1 ½“. Equipped with desludging nozzle and ball valve ½“, and magnetic rod screwed into the thermwell. For attachment to the boiler return line beneath the manifold.
Set components: EPP insulation in compliance with EnEV, ball valve, magnetite filter cartridge
Made of galvanized sheet steel with transparent cover for three-line label for screw fixing to the thermal insulation. Size: 100 x 50 mm, colours: red for flow line / blue for return line
ΔT 20 K
|Number of heating circuits||Heating water throughput rate||Length||Water quantity||
Heat transfer at 70°/50°C
Return flow boost
|[kW]||[Width / Height]||[HK]||[m³/h]||[mm]||[l]||[kW]||[%]||[K]||[mm]|