HydroFixx cascade

Combined flow and return manifold with chambers arranged adjacent to each other,
separated by sinusoidal partition wall, with directly incorporated,
flat, horizontally welded-on low loss header for use on the primary
side directly beneath the heating boilers. Consisting of square profiles S235,
wall thickness 4 mm, with two lateral nozzles for the connection of the
secondary heating circuits. The HydroFixx cascade is pressure-tested and primed
at the factory. Operating pressure max. 6 bar. Operating temperature max. 110°C.

go to product

Standard cascade

Manifold / Collector pipe for the accommodation of the boiler connections made of two section tubes, on top of each other, material S235 with welded-in end caps and 3/4" drain connection couplings.
A low loss header is firmly attached as a unit to the manifold / collector pipe on the left-hand or right-hand side, depending on the type of installation. Fixed pedestal in standard design with an overall height of 200 mm. The Sinus cascade unit is pressure-tested at 9 bar and primed at the factory. Application range: Operating temperature up to max. 90°C, operating pressure up to max. 6.0 bar.
Low loss header made of hollow square profile S235 with two lateral nozzles for the connection of the secondary heating circuits.

go to product

Your direct line

Any questions or comments?

We will be pleased to offer advice and answer any questions concerning our product range.

Just write us a message or contact us by phone:
+49 2557 / 93 93-0.

We are available from Monday to Thursday from 07.30 a.m. to 04.30 p.m. and Friday from 07.30 a.m. to 15.00.